12FGA Help
#1
Junior Member
Thread Starter
Join Date: Dec 2019
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
12FGA Help
Need some help with 12FGA. I'm trying to program a throttle (master) elevator (slave) mix for IMAC condition only. I'm unable to isolate it so it only mixes in the " IMAC" switch position. I don't want it activated in the "Landing" condition position. It's on switch SD. Top switch position is not assigned to anything. Middle position is "IMAC" and bottom position is" landing",
Thanks in advance for your continued help. Regards, Tom
Thanks in advance for your continued help. Regards, Tom